Specifications

Tutorial 2: Working with Data 31
changes and revert to the original map.
Using the Viewer Tool Bars
The following Tool Bars can be displayed in the Oasis montaj Viewer. Note that the
Database Tool Bar can be found on page 23.
To Show|Hide tool bars, on the Tools tab of the Project Explorer select the tool bar of
interest, right-click and select Show|Hide from the popup menu.
STANDARD BAR
Open Database
Use this command to open a previously defined Oasis montaj database.
Open Map
Use this command to open an existing Geosoft map.
Run GX
Use this command to run a GX from the GX directory.
Load Menu
Use this command to load a menu to the menu bar.
MAP TOOLS BAR
Map View/Group Manager
Click this button to open the Map View/Group Manager tool which enables
you to display and edit the Views and Groups in a map. This tool consists of a
‘tree’ structure that contains two main branches representing the Base view and
the Data view.
Under each view, a number of groups are listed according to their layer on the
map.
For instructions on how to use the manager, please refer to the Online Help.
Select or Change the Current View
Click this button Switches between data (ground coordinate) and base (map
coordinate) views.
Select a Group
Click this button to select the different groups in a Map (including image
aggregates, contours, surrounds, and other graphics layers). Once selected, you
can copy the group to the clipboard.
Shadow Cursors
Click this button to display a Shadow cursor (
) on a map for dynamic linking.
As you move the cursor around the map, the value for that same geographic
location is highlighted or indicated in all linked databases, profiles and maps.