Specifications

22 Tutorial 2: Working with Data
Tip:
To see where the Z1 values are located on the profile line simply click on a
value in the Mag channel and the system will show a box indicating the
corresponding area on the profile.
3. We recommend you experiment with the various options available for profile
display, appearance, scaling and plotting etc. available via the Profile menu,
under Profile Options.
TO DISPLAY A DIFFERENT PROFILE:
1.
Move the cursor to the Line Header Cell in the top left corner of the spreadsheet.
The currently displayed line in the worksheet is L290:0.
2. Click right mouse button on this cell and select the List option from the popup
menu. A list of the line numbers is displayed. You can think of each line number
as a worksheet in the spreadsheet window. When you view a new line number a
new worksheet is opened in the spreadsheet window with corresponding line
number information.
3.
Click on L350:0 from the list and display a profile for this line. The profile for
L350:0 is shown below: