Router User's Guide
Table Of Contents
- Important! Before You Begin
- Package Contents
- You Will Also Need
- Installing the X3
- Removing the X3 Software
- Universal Plug and Play
- If You Need Help
- Why Monitor Status?
- Monitoring System Status
- Monitoring ADSL Status
- How To Use the Advanced Options
- Changing Your WAN Settings
- Changing Your Firewall Settings
- Changing User Names and Passwords
- Backing Up Your Configuration
- Resetting Default Settings
- Using IP Filters
48 ADSL X3 User’s Guide
Appendix C
TCP/IP Network Settings
If you are using a Macintosh or Linux computer, you must ensure
that your computer’s TCP/IP network settings are configured
properly. Otherwise, you will not be able to connect to the
Internet.
Note:
If you are using a Windows computer, you do not have to
configure the TCP/IP settings. This is because your Windows
computer will automatically configure them for you. Only
Windows users who are troubleshooting the X3 will need to verify
the TCP/IP settings.
Depending on your operating system, follow the steps in the
appropriate section to ensure your TCP/IP settings are correct.
•
If you are using Macintosh, see Macintosh TCP/IP Settings
on page 49.
•
If you are using Linux, see Linux TCP/IP Settings on
page 51.
•
If you are using Windows, see Windows TCP/IP Settings on
page 52.