Router User's Guide
Table Of Contents
- Important! Before You Begin
- Package Contents
- You Will Also Need
- Installing the X3
- Removing the X3 Software
- Universal Plug and Play
- If You Need Help
- Why Monitor Status?
- Monitoring System Status
- Monitoring ADSL Status
- How To Use the Advanced Options
- Changing Your WAN Settings
- Changing Your Firewall Settings
- Changing User Names and Passwords
- Backing Up Your Configuration
- Resetting Default Settings
- Using IP Filters
Appendix B: Front and Back Panels 47
The back panel of the X3 looks like this:
The following table describes each item on the panel.
Port Description
ADSL
Jack to connect the modem to the ADSL telephone wall
jack.
PHONE
Jack to connect a phone to the modem.
RESET
Button to reset the modem to its system default settings
(necessary if communication link is lost).
ETHERNET
Jack that can connect the unit to an access point, a
network hub, or the Ethernet jack of a computer.
PWR
Port to connect the unit to the power adapter.
ON/OFF
Button to turn the unit on or off.