Router User's Guide
Table Of Contents
- Important! Before You Begin
- Package Contents
- You Will Also Need
- Installing the X3
- Removing the X3 Software
- Universal Plug and Play
- If You Need Help
- Why Monitor Status?
- Monitoring System Status
- Monitoring ADSL Status
- How To Use the Advanced Options
- Changing Your WAN Settings
- Changing Your Firewall Settings
- Changing User Names and Passwords
- Backing Up Your Configuration
- Resetting Default Settings
- Using IP Filters
Chapter 1: Installation Instructions 19
5
55
5
On the Autodetect page, click Write Settings to Flash.
6
66
6
Verify that your Internet connection is working. Open your
Web browser (i.e., Internet Explorer or Netscape Navigator)
and try to connect to a familiar Web address.
If you connect successfully, your installation is complete
and you are ready to browse the Web!
Congratulations! You have completed all you need to do to
get your computer on the Internet. The remainder of this
user’s guide is for troubleshooting and for advanced users who
need information about status monitoring and advanced setup
options.
Important!
If you did not connect, see Appendix D: Troubleshooting
on page 55.