Operation Manual
12
Using the tuner/Setting the type of batteries used
Using the tuner
Setting the type of batteries used
Press the tuner switch to turn the tuner ON and OFF. Play the open string that
you want to tune and the closest pitch name LED will light. The LED meter will
show the pitch error.
Tuner
indicator (ON/OFF)
When the pitch is confirmed, the
LED at the center of the meter will
light green and LEDs to the left and
right will light red.
NOTE
The output is muted when the tuner is on. The standard pitch for middle A is xed to 440Hz.
←
Low pitch High pitch
→
Set the type of battery used by the so that the remaining battery charge
can be indicated accurately.
• Turn the power ON while pressing .
(The boost indicator blinks.)
• Press to set the type of battery used.
Power indicator
(front panel)
• Press to conrm the setting. (The boost indicator stays lit.)
Lit green: Alkaline batteries
Lit red: Nickel metal hydride batteries