Specifications

Front Panel
(1 ) INPUT dial
(2) Input level indicators
rl
L0 INPUT 0 R 7 OUTPUT1
BALANCE LEVEL
L*>R
(3) OUTPUT BALANCE dial
(4) OUTPUT LEVEL dial
(5) Program number indicator
(6) P rog ramr 1 A keys
lnput/Output Controls
INPUT dial
For adjusting the level of the input signal. The inside
dial is for adjusting the left
(L) channel and the outside
is for the right
(R) channel. (When adjusting
separately, hold one dial in place while turning the
other.)
Input level indicators
For monitoring the level of the input signal. When an
input signal is received, the LED lights up in green and
changes in
color
to amber as the level becomes greater.
When a high level signal capable of causing distortion
is input, the LED at the top lights up in red. (For
best
results, adjust the input level so that the
LED is usually
in amber.)
OUTPUT BALANCE dial
For adjusting the overall balance of the sound between
direct and effect. At the DIRECT position, the input
sound is heard without processing. At the EFFECT
position, only the processed sound is heard. This
setting is applied globally to all effects.
OUTPUT LEVEL dial
For adjusting the overall output level.
Program/Effect Selection Controls
(5) Program number indicator
Indicates the selected program number (1 - 99).
(6) Program V / A keys
For selecting programs.
(7) Effect selector dial
(8) LCD display
LCD Display and Editing Controls
LCD display
Shows various operating information, such as the
parameter values (up to three digits) and other
messages.
Data Entry controls 1,2 and 3
For adjusting parameter values.
Page key
For advancing through the different display "pages" in
the LCD. (The selected page and number of pages
available is indicated at the bottom left of the LCD.)
Compare key
Used in editing a program, this switches back and forth
between the currently edited values and the values of
the original program, allowing comparison of the
sound. When in the Utility mode, this key is used to
select the previous display page.
UTILITY key
For selecting the functions of the Utility mode (such as
setting the MIDI channel, transferring data, etc.).
EFFECT key
For canceling the effect processing. The LED above
the key lights when the effect is on.
STORE (EXECUTE) key
For storing a program to internal memory. Press the
key twice to store the program to
the selected program
number. When the LCD prompts you
to confirm an
operation with an "OK?" message, this key functions
as an EXECUTE key to actually perform the operation.
(7) Effect selector dial
For selecting effects. The LED indicates the currently
selected effect.
4
Section I : Names and Functions of the Controls and Terminals