Specifications
[Page
61
Initialize
This
function is similar to the factory preset program
call
function above, except that it replaces all
99
programs in
internal memory with the factory preset data,
and
resets
all
other parameters
to
their factory settings.
To use this function:
1.
First make sure that you wish to replace the programs
in internal memory; they will be irretrievably lost if
they have not been saved beforehand.
2.
From
this page, press the STORE key.
STORE
The display prompts you to confirm
the
operation. Press
the
STORE
key again to execute the operation, or press
the
CANCEL
key to abort and exit from the Utility
mode.
Program Change Learn
Program Change Learn is a convenient function that
registers or memorizes program change numbers
received from a connected
MIDI
device. This lets you
call up a certain numbered program on the
9120
by
selecting
a
different numbered program on your
MIDI
device. For example, this would come in handy
when
you want
to
have
9120
program number
62
automatically
selected when
you
select preset number
8
on your
synthesizer. To use this function:
l.
Make sure that the
MIDI
device has been properly
connected to the
9120
and that the
MIDI
channel
settings for both units have been properly made.
2.
Select the desired program on the
9120
with the
V/
A
keys.
3.
Press the
PRG-CHG
LEARN
key then continue
holding down the key.
4.
Select the desired program or preset on your
MIDI
device and transmit the program change message.
24
Section
N
:
Utility
Mode
and
Program
Change
Learn Function