Specifications

Tempo Note type Delay time
Pitch
a BPM (Tempo; beats per minute): 40 - 240 bpm
Determines the tempo
In addition to being able
to set the tempo manually here,
you
can also have the tempo automatically set by:
... a MIDI clock signal (receive from a connected
sequencer or rhythm machine).
... tapping the tempo on the TRIGGER key or a switch
connected to the CONTROL
IN jack.
... tapping the tempo on a key from a connected MIDI
keyboard.
a Note type:
,) 3-- : Eighth note triplet
)---. : Eighth note
J 3- : Quarter note triplet
J - --. : Quarter note
4 - --. : Half note
Determines the basic note value.
(This parameter value
is shown at the top middle section of the display.)
To use the calculator function:
1. Set the tempo with Data Entry control 1. The range is
from
40 to 240 beats per minute.
This effect lets you change the pitch of the sound, either
an octave above or below normal pitch. Since the
amount of pitch shift can
be set independently for the left
and right channels, three separate pitches
(the two
processed ones and the one of the direct sound) can
be
heard. This lets you create a natural yet complex chorus
effect in which the left and right sounds are slightly
detuned compared
to the direct sound. Other applications
include setting the pitch shift to an octave above or below
(for example. to make a six-string guitar sound like a
twelve-string), or setting the pitch to other intervals (such
as a fourth or a fifth)
to create instant harmonies.
The Pitch effect features two different types: a stereo
pitch shift cffcct with independent
left/right settings, and
a Pitch-Reverb effects that combines a mono pitch shift
with
reverb. uhe parameters are different for each type.)
For more sophisticated pitch shift applications in
which the pitch shift changes according to
MIDI
note input, the 9120 also features an "intelligent"
pitch shift function
(MIDI Harmonized Pitch Shift)
in the SFX 2 effects. (See page 20)
@ Type (Pitch shift type): Ster Pitc (Stereo pitch Shift),
Pitc>Rev (Pitch-Reverb)
Stereo Pitch Shift
This type provides independent pitch shift control over
the left and right channels.
[ Stereo Pitch ShiftlPage 2 ]
2. Set the note type with Data Entry control 2. (The
setting is shown at the top middle section of the
display.)
The delay time is automatically calculated and appears at
the top right (third section) of the display.
If the calculated delay time is longer than the maximum
(2.0 seconds for mono, 1.0 second for stereo), the word
"out"appears at the bottom right of
the display.
3. To actually enter the calculated delay time, press the
STORE (EXECUTE) key. To cancel the function
without entering the calculated delay time and return
to the original display, press the CANCEL key.
@ PitL (Left channel shift chromatic): -12 - 0 - 12
semitones
Determines the number of semitones over which the
pitch is changed. The range is one octave above or
below the input pitch.
@ FinL (Left channel shift fine): -50 - 0 - 50 cents
Determines the fine tuning of the pitch-shifted signal, in
cents (11100 of a semitone).
@ MixL (Left channel shift mix): 0 - 100
Determines the level of the pitch-shifted signal of the left
channel.
-
Sectionill : Effects and and Their Parameters
17