Specifications

Bypassing the Effects
· Step on the BANK switch several times until the LED of the FC01
displays “P.”
The LED starts flashing.
· Press one of the Patch 1 to 4 keys.
The LED stops flashing and the 9000 shows the bank before entering the Bypass status.
The BYPASS LED lights up.
34
FC01 9000
P VOL10023
2 -- 23
Bypass Operation
To release the 9000 from the Bypass status, using the Bank and Patch keys of the FC01,
select any of the Patches.
Note:
The 9000 can be remotely controlled by the FC01 only when it is put in the Play mode.
When the 9000 is put in another mode, the LED of the FC01 flashes, and selection of the
Patches and on/off status of the Bypass function are disabled.