Specifications

App l i c a t i o n E x am p le Remote Control Using The Foot Controller
Using the optional foot controller FC01, the Patch selection and on/off of the Bypass
function can be controlled by the foot.
Making Connections to the Foot Controller
· Using the cable supplied with the FC01, connect the FC01 to the
REMOTE connector (on the bottom of the panel) of the 9000.
33
REMOTE
FC01
9000
BANK Switch BYPASS LED
DISPLAY LED PATCH Switch 1-4
Connections Between the FC01 and the 9000
The FC01 does not require an independent power supply because power is supplied from
the 9000 to the FC01. Be sure to turn off the power of the 9000 before connecting the
FC01.
Selecting the Patch
· Step on the BANK switch.
The LED of the FC01 lights in the following order, from 0 ® 1 ® 2 ® 3 ® 4 ® P ® 0
.
0 to 4 are for the Bank numbers while the “P” is for the Bypass Standby status. If the
9000 is already in the Bypass status, “P” is skipped and “0” is lit instead.
0 1 2 3 4 P
Selecting the Desired Bank
· Using the Patch 1 to 4 key, select the desired Patch number
Note:
The same as the operations on the panel of the 9000, the Patch is not changed when the
Bank is changed. The selected Patch is activated when you press the PATCH key.