User guide

TIP: Other wireless networks might be within range of your network. Your neighbors,
for instance, may be within range. If possible, there should be at least a five-channel
difference between your network and neighboring networks with strong signals.
Having less than a five-channel difference may result in interference with your
connection.
Wireless Security Settings
If you accepted the default to Enable the Wireless Module (on the Wireless Settings page
at Step 4), the following page opens when you click Next.
Configuring Authentication and Encryption
By default, Authentication and Encryption services are not configured. You can
configure both settings on the Wireless settings page.
1 To configure Authentication, select either Wired Equivalent Privacy (WEP) or
WiFi Protected Access-Pre-Shared Key (WPA-PSK/WPA2-PSK) from the
dropdown menu.
Important: Be aware that WEP is a basic authentication service and is not as
secure as WPA-PSK/WPA2-PSK. If you have devices on your wireless network that
support only WEP (for example, some gaming consoles), you will need to select
WEP as your Authentication method.
Chapter 3: Using the Configuration Manager's Setup Wizard 21