Specifications

BATS AND PORTABLE BATS OPERATION
3-3
DSP
RX1 When illuminated (green), indicates that the internal data acquisition DSP
card is receiving data from the internal SBC (Single Board Computer) . It il-
luminates when the Trackman software sends a system parameter to the
Transceiver.
TX1 When illuminated (yellow), indicates that the internal data acquisition DSP
card is transmitting data to its internal SBC. It illuminates when the the DSP
is sending data to the SBC.
E-NET
When illuminated/flashing indicates activity on the Ethernet lines. If no flashing or continuous illu-
mination then usually indicates a hardware Ethernet connection problem. Some flashing but no
connection usually indicates a software setting, IP address or Port number is wrong.