Specifications

BATS AND PORTABLE BATS OPERATION
3-67
 BATS Beacon List setup when tracking one pinger
Scenario: Tracking a lost Pinger on the seabed. (not common)
 Only one Beacon can be enabled when in Pinger mode (Can be any one of the Beacons 1-4) Enter in the repetition rate of the
beacon.
 Beacon 1 LED (Receive) shows status
 Trigger-In 1 Not applicable. Trigger-Out 1 Not applicable.
 The interrogation rate is set to the pingers repetition rate. The Interrogation rate should be asynchronous to the pinger. This
provides an internal trigger to the system thus initiating the data processing for the target.
Num
Target
Name
Type
Serial#
Chan#
Status
Xmit
Interval
Xmt
Freq
Recv
Freq
Pulse
Width
Manual
Depth
Filter
Level
Trigger
1
1
2
1
3
1
4
Beacon4
Pinger
1
Active
N/A
N/A
27 CW
N/A
25
4
N/A