Specifications

BATS AND PORTABLE BATS OPERATION
3-57
USBL  Send TrackPoint (BATS) Config
Synchronizes the BATS Transceiver with the saved parameters from Trackman.
USBL  Get Sensor Data
Queries the Transceiver to read the analog sensor inputs and display their values. The A/D data is
read once per command. It is possible to repeat the command while leaving the box on the screen.
Timed Stamp: The time the analog data was read
Time Stamp Count: The difference between the BATS’ CPU clock and DSP clock.
Last Time Stamp: The last time stamp occurrence.
Temperature: The BATS Hydrophone Temperature in degrees C.
Pitch/Roll: The analog pitch value in degrees.
Compass: The analog compass in degrees.
USBL  Get Status
Obtains the Status of the
BATS Transceiver. Displays
the Time, System Type , Re-
vision of the DSP Software,
DSP Serial Number, BATS
CPU software revision and a
Self Test indication.