Specifications

BATS AND PORTABLE BATS OPERATION
3-35
Setup  Device List (Ports)
When selected, the Device List dialog box is displayed and the main window minimizes. (This is the
same as double-clicking on the Device List within the Project Box.) When closing the Device List
window, the main window is displayed again.
The Device List shows the list of all peripherals or I/O to the Processor. (FYI: The Device List is
read from a “devices.ini” file stored under the ORE TrackPoint folder within the Program Files fold-
er. These are EdgeTech configured files and should not require modification.)
Device (ports) Setup dialog box: This box allows setup of the various I/O to the Processor.
Double-clicking on an entry in the list (or using the arrows keys to move to the desired entry and
hitting 'Enter') brings up the Device Setup dialog for that entry.
TrackPoint BATS:
Click on the TrackPoint BATS “Device List” line and then
double click to bring up the Setup Dialog Box.
Setup this dialog as listed below. This port is required to
communicate with the BATS Transceiver.
The “Sentence Input to Trackman” is the data format
that is coming from the BATS USBL Transceiver to the
PC. The “Sentence Output from Trackman” is the da-
ta format that is sent from the PC (on this same port) to
the BATS Transceiver.