Specifications

BATS AND PORTABLE BATS OPERATION
3-19
3.3.3 SETUP MENU
Setup  Beacon List
The Beacon List window displays all beacons at once, in a table layout, showing their parameters of
primary interest. (Clicking on the Beacon’s icon within the Project Tree is a quick key to displaying
the Beacon List. ) Having a single window that allows the user to see the
operating frequencies and parameters of all the available beacons makes it possible to compare
parameters and change any that may conflict. Double-clicking on an entry in the list (or using the
arrows keys to move to the desired entry and hitting 'Enter') displays up the Beacon Setup dialog
for that entry. If the entry in the list was 'empty', the Setup dialog comes up in 'Adding a New
Beacon' mode. Entries may be moved to a new position in the list (thereby obtaining a new beacon
number) by cut-and-paste (Ctrl-X / Ctrl-V) keyboard operations. Cut-and-paste operation only
available within beacons 1-4 or within beacons 5-7. (Cannot copy simultaneous to consecutive
tracked beacons or vice versa.) Refer to Section 3.4 for Beacon List examples.
The 4460B can have up to 4 programmed beacons. All four can be active at any one time.