Specifications

BATS AND PORTABLE BATS OPERATION
3-15
File  Open Existing Job Folder
The Job entry dialog window is used
to define a new job or to access
and/or modify an existing job. Each
job has it’s own complete set of pa-
rameter files saved in a separate sub-
folder.
Select a job from the ‘Job Name’ pull
down menu. The ‘Job Description’ is
then displayed for that job. Select OK
to set the system up using those previously set parameters.
The ‘Job Description’ of the active job appears in the Title Bar of Trackman’s Main Window. See be-
low.
File  Disk Services
Disk Services requires that at least one De-
vice is selected. For example, when Devices
is selected, a BATS device must have a con-
nection type other than ‘none’ selected.
(Playback, COM port or IP(net)). The Disk
Services dialog controls the ‘Record and Play’
operations for saving and playing back an
EdgeTech specific data files. If a device is ac-
tive it shows up in the pull-down menu at
right. If no devices are active then a Dialog
box as shown below is displayed. The system
then prompts for display of the Device List,
allowing operator to enable various I/O de-
vices/RS232 port data. Once enabled the de-
vices are shown in the pull-down menu at the
right. See Setup/Device List (ports) for setup
of ports. Only one device can be enabled for
saving to disk.
Click on “Open File” and the standard Win-
dows® dialog box pops up. Enter in File name and click “Open”. The data present on that port will