User manual

a When the Configuration Manager launches, log in as admin, then select
Advanced > Basic Settings > Wireless to open the Wireless Setup page.
b Click the WPS Setup button to open the Wi-Fi Protected Setup page.
c Select PIN Code from the Config method dropdown menu.
d Enter the PIN number from your client device.
e Click Trigger to start the connection process on the Modem/Router.
Important! You must do this within two minutes after starting the
Modem/Router.
f On the Modem/Router, when the program displays a message that the
process succeeded, click Save to save the configuration
Method Three
Use this method if your client device requests the Modem/Router’s PIN number. The
client is the Registrar. Use this method if the client(s) are to connect to multiple
access points so that a client will control the configuration instead of the
Modem/Router.
1 If you haven't already done so, open a Web browser and type http://192.168.2.1 in the
address bar.
a When the Configuration Manager launches, log in as admin, then select
Advanced > Basic Settings > Wireless to open the Wireless Setup page.
b Click the WPS Setup button.
c Select Enrollee from the Config Mode dropdown menu.
d Click Generate Pin to generate a new Pin number.
e Enter the Modem/Router's Pin Number into your client device. Refer to your
client’s documentation for further details.
Important! You must do this within two minutes after starting the
Modem/Router.
f Click Trigger to start the connection process on the Modem/Router.
g On the Modem/Router, when the program displays a message that the process
succeeded, click SET to keep the Modem/Router from receiving new
configuration parameters from another WPS Registrar.
h Click Save to save the configuration.
36 3G+ Modem/Router with Wireless-N and Phone Port User Manual