User manual

To disconnect from the current netw
From the Start menu, select Connect to.
er network dialog box, select the current
4 onnect to another network or click Close to
Co er with Built-in Wireless Capabilities
On your Windows desktop, click the Wireless Network Icon in the System Tray.
If
ter
nect.
¾ When y le
networks re other
wireless networks that are within range of your network. Your neighbors, for
an a
ault,
must
To
On your Windows desktop, click the Wireless Network Icon in the System Tray.
2 your Wireless Network Name. And click on Disconnect.
ork:
1
2 In the Disconnect or Connect to anoth
network and click Disconnect.
3 In the Are You Sure? message box, click Disconnect again.
In the next dialog box, you can c
complete the disconnect procedure.
nnecting a Windows XP Comput
1
2 In the wireless network options box, highlight the Wireless Network Name (SSID)
you gave your wireless network in Step 4 of the Setup Wizard. If you did not
change the Wireless Network Name (SSID), select the default name
Zoom_xxxxxx, where xxxxxx are 6 random
alphanumeric characters. The
complete Wireless Network Name is printed on the bottom label of your unit.
you want to automatically connect to the Modem/Router, click the Connect
Automatically box. Then click Connect.
• When prompted, enter the Security Key found on the bottom label of
your unit. If you changed the key in Step 4 of the Setup Wizard, en
the new security key and click Con
• If you disabled wireless security in Step 4 of the Setup Wizard select
Connect Anyway when warned that your network is unsecure.
ou click on the wireless network option box, Windows will scan for availab
. More than one wireless network may appear in the list. These a
instance, may be within range of your network. Each wireless network has a
channel associated with it. We recommend there be at least a five-channel
difference between your network and those of your neighbors. Having less th
five-channel difference may result in interference with your connection. By def
the Modem/Router uses channel 10. If you need to change this channel, you
do so using the Wireless Setup page of the Zoom Configuration Manager. For
instructions on how to log in to the Zoom Configuration Manager, see page
10.
After logging in, select Wireless from the left-hand menu. On the Wireless page
you can select a new channel from the drop-down menu.
disconnect from the current network:
1
Select
Chapter 4: Connecting Devices Wirelessly to the Modem/Router 31