User manual

• PPTP Password
This is PPTP password that your service provider assigned to you.
Go to Go to
Step 4. Wireless Settings on page 21.
Configuring L2TP
The page shown below only appears if you select the L2TP button on the Select
WAN Type menu. Otherwise skip this section.
• IP Mode
This is the mode used to generate the IP address. Select an option from the
dropdown menu, based on your service provider's requirements.
• IP Address
This is the IP address that identifies the L2TP server. Your service provider
supplies this address. Only used if Static IP Address is selected as the IP
Mode.
• Subnet Mask
This is the Modem/Router's subnet mask. Your service provider supplies this
address. Only used if Static IP Address is selected as the IP Mode.
• WAN Gateway IP
This is the WAN Gateway IP address of the L2TP server. Your service
provider supplies this address. Only used if Static IP Address is selected as
the IP Mode.
• Server IP Address/Name
This is the name and IP address of the L2TP server. Your service provider
supplies this information, if needed.
20 3G+ Modem/Router with Wireless-N and Phone Port User Manual