User`s manual

1 Installing Your Cable Modem 13

Restart your computer.

You should see a dialog box similar to the one below.

Note: If this dialog box does not display automatically, go to

Start |Programs |Zoom Cable Modem |Cable Modem

Monitor.

Select your computer’s Ethernet NIC card from the drop-

down list and click Next.

The following dialog box displays.

Click Restart System.

The modem starts an automated power-up process that is de-

scribed on page 14.

Note:

The Resource Checker, User Manual, and supplementary

software are also installed on your computer during this

installation procedure. For removal instructions, see page

23.