Installation manual

50
MODE 22 PROGRAMMING WORKSHEETS
[001] - [008] System Options
Page 27
Address Default
[001] Light 1 OFF Option 1 Open / Close Report Select
Light 2 OFF Option 2 Close Confirmation Option
Light 3 OFF Option 3 Force Arming Select
Light 4 OFF Option 4 Reserved
Light 5 OFF Option 5 Quick-Arm Select
Light 6 ON Option 6 Alarm Memory Indication
Light 7 ON Option 7 Siren Driver Enabled
Light 8 OFF Option 8 Bell Squawk Enabled
Address Default
[002] Light 1 ON Option 9 Access Code Required for Bypassing
Light 2 OFF Option 10 Immediate Bypass Report
Light 3 OFF Option 11 Bypass Report on Exit
Light 4 OFF Option 12 Common Bypass Report
Light 5 ON Option 13 Bypassed Zones Display on Exit
Light 6 OFF Option 14 Quick Exit
Light 7 OFF Option 15 No arming on AC failure and low battery
Light 8 OFF Option 16
Reserved
Address Default
[003] Light 1 OFF Option 17 Master Code not Changeable
Light 2 ON Option 18 Only Master Code able to send User Message
Light 3 OFF Option 19 Immediate Restore
Light 4 OFF Option 20 Memory Security Switch
Light 5 OFF Option 21 Keyswitch Arming/Disarming
Light 6 OFF Option 22 Maintained Keyswitch Arming/Disarming
Light 7 OFF Option 23 Reserved
Light 8 OFF Option 24 Reserved
Address Default
[004] Light 1 ON Option 25 Programmable Output 3 Normally High
Light 2 OFF Option 26 Installer Lockout
Light 3 OFF Option 27 Keypad Lockout
Light 4 OFF Option 28
Reserved
Light 5 OFF Option 29 Reserved
Light 6 OFF Option 30 Reserved
Light 7 OFF Option 31 Reserved
Light 8 OFF Option 32 Immediate AC Failure Report