Installation manual

1
INTRODUCTION
The DV8000 is a flexible and versatile security system designed to meet the most demanding security
requirements. The heart of the system is the DV8000 Main Control Panel, which is connected to other system
elements using common 4-conductor unshielded station wire. The main panel processes signal information and
communicates with the monitoring station. The main panel features 8 zones and 1 Auxiliary Input. Any of the 8
zones may be programmed as 1 of 15 different burglary types. The panel also allows the creation of up to four
separate partitions.
The system is programmed and operated using the DV8000 KP LED Keypad or the keypad installed on the control
panel cabinet. Up to four keypads may be used on the system.
The DV8000 has 3 Programmable Outputs with over 30 available programming options. For a permanent record of
events on the system, the DV8000 can send output to a serial printer.
System Overview
EEPROM Memory
• Non-volatile EEPROM memory retains programming even if both AC and Battery power are removed.
Arm / Disarm Codes and Reporting
• 16-user Arm and Disarm Reporting
• Split Arming in 4 Groups
• Zones and Users’s Access Codes have programmable Group Assignment
Operation
• All Zones programmable as 1 of 15 types
• 8 Zones: 1 normally closed high zone; 7 programmable end-of-line resistor normally-closed or
normally open zones
• 1 Fire Input: Class A
• 3 Dedicated Keypad Zones: Fire, Panic, Emergency
• 1 Programmable Auxiliary Input
• All Alarm and Restoral codes are individually programmable
• Built-in Low Battery Disconnect
• Fuse Protection
• 3 Programmable Outputs with choice of over 30 programmable options
PGM1: Switched to negative through current limiting resistor
PGM2: Switched to negative through current limiting resistor
PGM3: Commercial rating: 12V positive, 25 mA
Residential rating: 11.6 to 12.5V positive, 25mA
• Auxiliary Power Output - up to 530 mA
• Bell: 12V 1.0A
• 100-event Buffer with “Printer Dump” feature
• Attractively styled LED Keypads
• Keypad features backlit keys and LED display with 4 system status lights: “Ready”, “Armed”, “Bypass” and “Power”
• Panel supports Keypad and Keyswitch operation
NOTE: The Keyswitch is intended for supplemental use only and does not replace a keypad.
Keypad Programmable
• The DV8000 includes a default program so it is operational straight from the box with a minimum of programming.
The control panel is completely programmable from the Keypad.
Increased Security
• Separate Installer Code
• Installer Code cannot operate panel or program Access Codes
Supervision