Installation manual

[802] No Restoral Reports for Troubles on Zones 1 - 7

Zone trouble restoral reports can be disabled for each individual zone. When this Address is entered, the Zone

Lights will indicate which zones will generate trouble restoral reports:

• if a Zone Light is ON, no trouble restoral report will be generated

• if a Zone Light is OFF, a trouble restoral report will be generated

To turn Zone Lights ON or OFF, press the number key for the desired zone.

[803] No Restoral Reports for Miscellaneous Alarms 1

Restoral reports for the events described below can be disabled. When this Address is entered, the Zone Lights

will indicate which events will generate trouble restoral reports:

• if a Zone Light is ON, no restoral report will be generated

• if a Zone Light is OFF, a restoral report will be generated

Zone Light Event

1 Auxiliary Alarm

2 Printer Failure

3 Fire Trouble

4 Auxiliary Power Fuse

5 Ground Fault

6 Siren Cut

7 For Future Use

8 Fire Alarm

To turn Zone Lights ON or OFF, press the number key for the desired zone.

[804] No Restoral Reports for Miscellaneous Alarms 2

Restoral reports for the events described below can be disabled. When this Address is entered, the Zone Lights

will indicate which events will generate trouble restoral reports:

• if a Zone Light is ON, no restoral report will be generated

• if a Zone Light is OFF, a restoral report will be generated

Zone Light Event

1 For Future Use

2 DVAC Failure

3 AC Failure

4 Low Battery

5 For Future Use

6 For Future Use

7 For Future Use

8 For Future Use

To turn Zone Lights ON or OFF, press the number key for the desired zone.

Programming Mode 20