Installation manual

21
[229] - [269] Trouble Definitions
Program a 1-digit Trouble Definition at each address from [229] through [269]. Do not assign type 5, 6, A or E to
the Trouble Definitions. The Trouble Definitions are programmed at the addresses listed here:
Address Restore Code
[229] Auxiliary Zone Alarm
[230] Printer Failure
[231] Fire Trouble
[232] AC Failure
[233] Auxiliary Power Fuse
[234] Siren Cut
[235] Low Battery
[236] Fire Alarm
[237] DVAC Line Fault
[238]
For Future Use
[239] EEPROM Failure
[240] Fail to Arm Schedule 1
[241] Fail to Arm Schedule 2
[242] Fail to Arm Schedule 3
[243]
For Future Use
[244] Ground Fault
[245] - [265] For Future Use
[266] Fire Key Alarm
[267] Panic Key Alarm
[268] Auxiliary Key Alarm
[269] Invalid Code
[270] - [300] For Future Use
[301] - [315] Alarm and Restoral Codes for Zones 1 to 8
and Trouble Zones 1 to 7
Program a 2-digit Alarm Code at each address from [301] through [315].
[316] - [428] For Future Use
[429] - [444] Trouble Alarm and Restoral Reporting Codes
Program a 2-digit Trouble Alarm Reporting Code at each address from [429] through [444]. The reporting codes
for each Trouble Condition are programmed at the addresses as shown below:
Address Trouble Condition
[429] Auxiliary Zone Alarm
[430] Printer Failure
[431] Fire Trouble
[432] AC Failure
[433] Auxiliary Power Fuse
[434] Siren Cut
[435] Low Battery
[436] Fire Alarm
[437] DVAC Line Fault
[438]
For Future Use
[439] EEPROM Failure
[440] Fail to Arm on Schedule 1
[441] Fail to Arm on Schedule 2
[442] Fail to Arm on Schedule 3
[443]
For Future Use
[444] Ground Fault
Programming Mode 20