Installation manual

10
Master Code must be entered to edit Access Codes
Mode 04: Reset Type 2 Zones and activate Programmable Output 3 for 2 seconds
Mode 05: Utility Output 1 to 3: used to activate an external device
Mode 06: Multiple functions, adjustments, and testing:
01 Set The Time (HH:MM)
02 Set The Date (DD/MM)
03 Set The Day of The Week
04 Quick-Arm Select
06 Activate Bell for 3 Seconds
07 Activate All Programmable Outputs for 3 Seconds
08 Activate Buzzer for 3 Seconds
10 Auto-Arm Time of Day for Schedule 1
12 Auto-Arm Time of Day for Schedule 2
14 Auto-Arm Time of Day for Schedule 3
16 Day Assignment for Schedule 1
17 Day Assignment for Schedule 2
18 Day Assignment for Schedule 3
20 Auto-Arm Schedule 1 ON/OFF
22 Auto-Arm Schedule 2 ON/OFF
24 Auto-Arm Schedule 3 ON/OFF
Mode 07: Set “door chime” zones; Keypad will beep each time a zone is opened or closed
Mode 08: Zone Alarms Memory Display
Mode 09: Trouble Alarms Memory Display
Mode 10: Keypad Panic Alarms Memory Display
Mode 11: Send user message
Mode 12: Display last user who armed/disarmed Group A
Mode 13: Display last user who armed/disarmed Group B
Mode 14: Display last user who armed/disarmed Group C
Mode 15: Display last user who armed/disarmed Group D
Mode 16: Print Event Buffer
Mode 17: Check for identical Access Codes
Mode 18:
For Future Use
Mode 19: For Future Use
Mode 20: Installer Programming Mode 20
Mode 21: Installer Programming Mode 21
Mode 22: Installer Programming Mode 22
Mode 23: Installer Programming Mode 23
Mode 25: Test Mode / Tamper Restore
Mode 26: Clear Event Buffer
Mode 27: Print Installer’s Programming
Mode 29: Transmission of Installer Messages
Mode 30: Installer Default Programming Mode
Mode 99: Language Select
Refer to the Instruction Manual for descriptions of all Keypad user functions.
KEYPAD FUNCTIONS