User manual

Network USB over IP Server With 1-USB2.0 Port

2.5 Connecting to an USB HUB

1. If you have more than one USB device that you would like to share over your network, you

may add an USB HUB (4-port maximum) to the Network USB over IP Server.

2. Connect the USB cable of the USB HUB to the USB port on the Network USB over IP Server,

and then connect the USB device(s) to the USB ports on the USB HUB. Make sure the power

adapter of the USB HUB is plugged in and powered on.

Note:

Network USB over IP server only can support up to 4 USB devices through an USB

HUB and certain USB devices require a direct connection to your computer in order to

function at full capacity. Please make sure the USB HUB which should be provided

extra-power.