Specifications

KVM Switch User’s Guide
28
OSD menu is
not at the
proper position
z OSD menu has fixed
resolution and its size
varies due to computer
VGA resolution
changes.
Use <F1>: Setup\Position to
move OSD menu and banner
to proper position.
Can not select
a computer
connected to a
slave
z Improper Master unit
connection
z Improper slave unit
connection
z Too many levels of
slaves
z Only Master PC port
can be connected to slaves.
z Connect slave CONSOLE
port to PC ports of the Master
z Only two level of slave units is
allowed. Pop up OSD again
to check if Master recognizes
the slave connection. Look
for plus (+) mark and the
number in OSD menu.
The KVM
Switch fails to
function
occasionally.
z Computers do not
supply enough power.
z Make sure a power adapter
with minimum of 9V 500mA
output rating is firmly
connected to the power jack.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY
FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTIAL OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF
BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED
BY THE USE OF THE PRODUCT EXCEEDS THE PRICE
PAID FOR THE PDOCUDT.
The direct vendor makes no warranty or representation, expressed or implied with
respect to the contents or use of this documentation, and especially disclaims its
quality, performance, merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the product or
documentation without obligation to notify any user of such revisions or updates. For
further information, please contact your direct vendor.
All the brand names and registered trademarks are the property of their respective
owners.