Specifications

KVM Switch User’s Guide

------------------------ Operation

Front Panel Push Buttons

You may select a computer by pressing the front panel push button directly,

or press hot-key or activating the OSD menu(for models with OSD only).

The front panel indicators(orange or red) will changes to the selected

computer port and the connected computer power on the green indicator will

turn on. When KVM is in Auto Scan mode the selected indicator will

flashes (orange or red)

Figure 7: Front panel indicator

If the computer was support 'keyboard/mouse power up' function, (press

certain keys or mouse buttons to startup the computers). The front panel

green indicators will light all the time even the computers are 'off'.

 KVM RESET

In case the Device replacement or change of configuration cause some

problem, pressing the front-panel Reset push buttons for re-configure the

system without turning either the KVM Switch or any computer off.