User guide

Configuring Network Settings
Chapter 6: Managing Your Network 83
The fields are enabled.
4. If desired, change your ZoneAlarm router’s internal IP address.
See Changing IP Addresses on page
83.
5. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page
85.
6. If desired, configure a DHCP server.
See Configuring a DHCP Server on page
86.
7. Click Apply.
A warning message appears.
8. Click OK.
A success message appears.
Changing IP Addresses
If desired, you can change your ZoneAlarm router’s internal IP address, or the entire range
of IP addresses in your internal network.
To change IP addresses
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. To change the ZoneAlarm router’s internal IP address, enter the new IP
address in the IP Address field.
4. To change the internal network range, enter a new value in the Subnet Mask
field.