User guide

Using Internet Setup
66 Check Point ZoneAlarm User Guide
Configuring an Ethernet-Based Connection
1. In the Port drop-down list, do one of the following:
• To configure an Ethernet-based connection through the WAN port, select
WAN.
• To configure an Ethernet-based connection through the DMZ/WAN2 port,
select WAN2.
2. In the Connection Type drop-down list, select the Internet connection type you
intend to use.
The display changes according to the connection type you selected.
If you chose LAN, continue at Using a LAN Connection on page
66.
If you chose Cable Modem, continue at Using a Cable Modem Connection on page
68.
If you chose PPPoE, continue at Using a PPPoE Connection on page
69.
If you chose PPTP, continue at Using a PPTP Connection on page
71.
If you chose Telstra, continue at Using a Telstra (BPA) Connection on page
73.
Using a LAN Connection
1. Complete the fields using the relevant information in Internet Setup Fields on
page
75.