User guide

Resetting Network Printers
388 Check Point ZoneAlarm User Guide
Note: Each printer port number must be different, and must be a high port.
To change a printer's port
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to USB, click Edit.
The USB Devices page appears, displaying a list of connected printers.
3. Next to the desired printer, click Edit.
The Printer Setup page appears.
4. In the printer's Printer Server TCP Port field, type the desired port number.
5. Click Apply.
Resetting Network Printers
You can cause a network printer to restart the current print job, by resetting the network
printer. You may want to do this if the print job has stalled.
To reset a network printer
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to USB, click Edit.
The USB Devices page appears, displaying a list of connected printers.
3. Next to the desired printer, click Reset Server.
The network printer's current print job is restarted.