User guide

Setting Up Network Printers
370 Check Point ZoneAlarm User Guide
6. Write down the port number allocated to the printer.
The port number appears in the Printer Server TCP Port field. You will need this
number later, when configuring computers to use the network printer.
7. To change the port number, do the following:
a. Type the desired port number in the Printer Server TCP Port field.
Note: Printer port numbers may not overlap, and must be high ports.
b. Click Apply.
You may want to change the port number if, for example, the printer you are setting
up is intended to replace another printer. In this case, you should change the
replacement printer's port number to the old printer's port number, and you can skip
the next step.
8. Configure each computer from which you want to enable printing to the
network printer.
See Configuring Computers to Use Network Printers on page
371.