User guide

Updating the Firmware
Chapter 17: Maintenance 333
This field… Displays… For example…
Installed Product The licensed software and
the number of allowed
nodes
ZoneAlarm Z100G (5 nodes)
Uptime The time that elapsed from
the moment the unit was
turned on
01:21:15
Hardware Type The type of the current
ZoneAlarm router hardware
SBox-200
Hardware Version The current hardware
version of the ZoneAlarm
router
1.0
Updating the Firmware
If you are subscribed to Software Updates, firmware updates are performed automatically.
These updates include new product features and protection against new security threats.
Check with your reseller for the availability of Software Updates and other services. For
information on subscribing to services, see Connecting to a Service Center on page
267.
If you are not subscribed to the Software Updates service, you must update your firmware
manually.
To update your ZoneAlarm firmware manually
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
2. Click Firmware Update.