User guide

Getting to Know Your ZoneAlarm Z100G Router
Chapter 1: Introduction 7
Network Requirements
• 10BaseT or 100BaseT Network Interface Card installed on each computer
• CAT 5 STP (Category 5 Shielded Twisted Pair) Straight Through Ethernet cable
for each attached device
• An 802.11b, 802.11g or 802.11 Super G wireless card installed on each wireless
station
• A broadband Internet connection via cable or DSL modem with Ethernet
interface (RJ-45)
Rear Panel
All physical connections (network and power) are made via the rear panel of your
ZoneAlarm router.
The following table lists the ZoneAlarm Z100G router's rear panel elements.
Figure 1: ZoneAlarm Z100G Router Rear Panel