User guide

Viewing Wireless Statistics
164 Check Point ZoneAlarm User Guide
To view statistics for a wireless station
1. Click Reports in the main menu, and click the My Computers tab.
The My Computers page appears.
The following information appears next to each wireless station:
• The signal strength in dB
• A series of bars representing the signal strength
2. Mouse-over the information icon next to the wireless station.
A tooltip displays statistics for the wireless station, as described in the following table.
3. To refresh the display, click Refresh.
Table 30: Wireless Station Statistics
This field… Displays…
Current Rate The current reception and transmission rate in Mbps
Frames OK The total number of frames that were successfully transmitted and received
Management The total number of transmitted and received management packets
Control The total number of received control packets
Errors The total number of transmitted and received frames for which an error
occurred
Dup ratio The percentage of frames received more than once.
Cipher The security protocol used for the wireless connection
QoS Indicates whether the client is using Multimedia QoS (WMM). Possible values
are:
• yes. The client is using WMM.
• no. The client is not using WMM.