User guide

Managing Ports
112 Check Point ZoneAlarm User Guide
Resetting Ports to Defaults
You can reset the ZoneAlarm router's ports to their default link configurations ("Automatic
Detection") and default assignments.
The LAN1-4 ports' default assignment is "LAN".
Resetting All Ports to Defaults
To reset all ports to defaults
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Click Default.
A confirmation message appears.
3. Click OK.
All ports are reset to their default assignments and to "Automatic Detection" link
configuration.
Resetting Individual Ports to Defaults
To reset a port to defaults
1. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
2. Next to the desired port, click Edit.
The Port Setup page appears.
3. Click Default.
A confirmation message appears.
4. Click OK.
The port is reset to its default assignment and to "Automatic Detection" link
configuration.