User guide

Using Network Objects
102 Check Point ZoneAlarm User Guide
4. Click Next.
The Step 2: Computer Details dialog box appears.
The computer's IP address and MAC address are automatically filled in.
5. Complete the fields using the information in the tables below.
6. Click Next.
The Step 3: Save dialog box appears with the network object's name. If you are adding
a new network object, this name is the computer's name.
7. To change the network object name, type the desired name in the field.
8. Click Finish.
The new object appears in the Network Objects page.
Table 17: Network Object Fields for a Single Computer
In this field… Do this…
IP Address
Type the IP address of the local computer, or click This Computer to
specify your computer.
Reserve a fixed IP
address for this
computer
Select this option to assign the network object's IP address to a MAC
address, and to allow the network object to connect to the WLAN
when MAC Filtering is used. For information about MAC Filtering, see
Configuring a Wireless Network on page
113.
MAC Address Type the MAC address you want to assign to the network object's IP
address, or click This Computer to specify your computer's MAC
address.
Perform Static NAT
(Network Address
Translation)
Select this option to map the local computer's IP address to an
Internet IP address.
You must then fill in the External IP field.