User guide

Configuring Network Settings
88 Check Point ZoneAlarm User Guide
3. Do one of the following:
• To allow the DHCP server to set the IP address range, select the Automatic
DHCP range check box.
• To set the DHCP range manually:
1) Clear the Automatic DHCP range check box.
The DHCP IP range fields appear.
2) In the DHCP IP range fields, type the desired DHCP range.
4. Click Apply.
A warning message appears.
5. Click OK.
A success message appears
6. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the ZoneAlarm DHCP server or another DHCP server is
enabled, restart your computer.
Your computer obtains an IP address in the new DHCP address range.