User guide

Configuring Network Settings
Chapter 6: Managing Your Network 87
A warning message appears.
5. Click OK.
A success message appears
6. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the ZoneAlarm DHCP server or another DHCP server is
enabled, restart your computer.
If you enabled the DHCP server, your computer obtains an IP address in the DHCP
address range.
Configuring the DHCP Address Range
By default, the ZoneAlarm DHCP server automatically sets the DHCP address range. The
DHCP address range is the range of IP addresses that the DHCP server can assign to
network devices. IP addresses outside of the DHCP address range are reserved for
statically addressed computers.
If desired, you can set the ZoneAlarm DHCP range manually.
To configure the DHCP address range
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.