User guide

24
Part 2: Configuring Your Network Security Level
The security level defines the security policy the firewall enforces for all incoming and outgoing connections.
To configure your security level
• Go to http://my.firewall and log in using the administrator username and password.
• Choose Security from the menu.
• Click on Firewall tab.
Drag the lever to the desired security level.
Note: Medium security level is the default level and is recommended for most cases. Leave it
unchanged unless you have a specific need for a higher or lower security level.
A message notifying change in the firewall security policy is saved successfully appeared.
You can learn more about what each level means by referring to page 138 in the ZoneAlarm
®
Secure Wireless Router Z100G User Guide provided on the enclosed CD-ROM.
Blocks all the traffic passing through
this gateway.
Enforces strict control on all incoming
and outgoing connections.
Enforces strict control on all incoming
connections, while permitting safe out-
going connections.
Enforces basic control on incoming
connections, while permitting all out-
going connections.