User manual

Broadband Wireless Router (AP) User Manual

Renew IP Address on Client PC

There is a chance that your PC does not renew its IP address after the Broadband Wireless

Router (AP) is on line and the PC can not access the Internet. Please follow the procedures

below to renew PC’s IP address.

For Windows 98

Step 1 Select Run from the Start menu.

Step 2 Type winipcfg in the dialog box and the click OK.

Step 3 When the figure below appears, click Release and then Renew to get an IP address.

For Windows 2000

Step 1 From the Start menu, point to Programs, Accessories and then click Command

Prompt.

Step 2 Type ipconfig at prompt. Then you will see the IP information from DHCP

server.

Step 3 If you want to get a new IP address, type ipconfig /release to release the

previous IP address and then type ipconfig /renew to get a new one.

For Windows NT4.0

Step 1 Select Run from the Start menu.

Step 2 Type cmd in the dialog box and the click OK.

Step 3 Type ipconfig at prompt. Then you will see the IP information from DHCP

server.

Step 4 If you want to get a new IP address, type ipconfig /release to release the

previous IP address and then type ipconfig /renew to get a new one.