Specifications

converter 1.5

2000 - 2005 urr Sound Technologies Inc.
61
operand explanation of operand and transform value
function Performs an internal function within converter, for example, starting and/or stopping
converter’s midi clock generator, starting/retriggering one or all of the lfo generators, etc.
Possible functions are:
•
start/stop clock
start/stop clockstart/stop clock
start/stop clock – single source i/o for clock generator
•
start clock
start clockstart clock
start clock – starts clock without subsequent stop on next use
•
stop clock
stop clockstop clock
stop clock – opposite of above
•
clk tempo +1
clk tempo +1clk tempo +1
clk tempo +1 – clock tempo incremented by one
•
clk tempo
clk tempo clk tempo
clk tempo –
––
–1
11
1 – opposite of above
•
clk tempo +range
clk tempo +rangeclk tempo +range
clk tempo +range – value taken from control source is used to sweep the clock
generator’s tempo upwards from the clock’s base tempo
•
clk tempo
clk tempo clk tempo
clk tempo –
––
–range
rangerange
range – opposite of above
•
tap tempo src
tap tempo srctap tempo src
tap tempo src – source operates in the same manner as the insert key to define
clock generator’s tempo
•
start all lfos
start all lfosstart all lfos
start all lfos – starts the transmission of midi data (if programmed to do so) from all
8 lfo generators
•
stop all lfos
stop all lfosstop all lfos
stop all lfos – opposite of above
•
i/o all lfos
i/o all lfosi/o all lfos
i/o all lfos – single source on/off for all 8 lfo generators
•
start sine lfo
start sine lfostart sine lfo
start sine lfo – starts the transmission of midi data (if programmed to do so) from
the sine lfo generator
•
stop sine lfo
stop sine lfostop sine lfo
stop sine lfo – opposite of above
•
i/o sine lfo
i/o sine lfoi/o sine lfo
i/o sine lfo – single source on/off for the sine lfo generator
•
start xxx lfo
start xxx lfostart xxx lfo
start xxx lfo etc…. – same as last three
•
retrig all / xxx lfo
retrig all / xxx lforetrig all / xxx lfo
retrig all / xxx lfo etc…. retriggers (starts at beginning of wave cycle) all lfos / a
single lfo generator
•
audio in on
audio in onaudio in on
audio in on – enables audio to midi conversion subsystem of converter. This
includes all filter channels as well.
•
audio in off
audio in offaudio in off
audio in off – opposite of above.
•
audio in i/o
audio in i/oaudio in i/o
audio in i/o – single source on/off for the audio to midi conversion subsystem.
•
L
LL
L-
--
-LP thresh.
LP thresh.LP thresh.
LP thresh. – gate threshold/trigger parameter for the left low pass audio channel.
Each audio channel is represented in a similar way, such as R-HP meaning the
right high pass channel, L-BP meaning the left main / band pass channel, etc.
•
L
LL
L-
--
-LP release
LP releaseLP release
LP release – the gate release parameter for the left low pass audio channel.
•
L
LL
L-
--
-LP dk time
LP dk timeLP dk time
LP dk time – the gate decay time parameter for the left low pass audio channel.
•
L
LL
L-
--
-LP freq.
LP freq.LP freq.
LP freq. – the filter frequency parameter for the left low pass audio channel.
•
L
LL
L-
--
-LP Q
LP QLP Q
LP Q – the filter Q parameter for the left low pass audio channel.
•
L
LL
L-
--
-LP gain
LP gainLP gain
LP gain – the filter’s gain parameter for the left low pass audio channel.