Specifications

converter 1.5

2000 - 2005 urr Sound Technologies Inc.
57
midi program operation parameters
midi parameters : program settings : operation settings : operation parameters
[ F2 – programselection – F6 – operationselection – F5 ]
operation name
Edits the name for the selected operation.
message type
Selects the statusbyte that identifies the messages to be processed by the current operation. Any midi
message that begins with this statusbyte will pass through this operation (and be transformed if the
additional ‘bytechecks’ (conditional verifications) are met). Possible values are between 128 and 255.
unprocessed echo
Enables or disables transmission of the original unprocessed version of the midi message (selected by
the current operation and byte checks) to the midi output accompanied by the new processed
message. This feature, as an example, would permit a layered effect if used in a midi split program such
as described previously in the programming tutorial – simply enable unprocessed echo for all three of
the programmed split operations, and the lower half of the keyboard will transmit on both channel one
as well as four.
# of byte checks
Defines the number of conditional verifications to perform on the incoming midi message. This
parameter can be used to disable certain conditional verifications in the same way as the
# of
operations
parameter in the midi program settings menu.
# of transforms
Defines the number of transforms to perform on the incoming midi message. This parameter can be
used to disable certain conditional verifications in the same way as the
# of operations
parameter in
the midi program settings menu.