Specifications

converter 1.5

2000 - 2005 urr Sound Technologies Inc.
56
midi processor program settings
midi parameters : program settings
[ F2 – programselection – F5 ]
program name
Edits the name for the selected processor program.
# of operations
Selects the number of operations used in the program. All operations, byte checks, and transforms are
performed sequentially starting with the first. This parameter allows you to disable the use of certain
operations within the program; for instance if there are 6 operations and this parameter is set to 5,
operation 6 will not be performed on the incoming midi data. This parameter should not be set to a
value higher than the number of programmed operations, in order to both reduce processing time on
slower computers and reduce the chance for possible user programming errors.