Specifications

converter 1.5

2000 - 2005 urr Sound Technologies Inc.
5
new in version 1.3
The following features were introduced
The following features were introducedThe following features were introduced
The following features were introduced in version 1.3 of converter:
in version 1.3 of converter: in version 1.3 of converter:
in version 1.3 of converter:
•
Program-specific assignable menu-page bookmarking – assign any menu page to one of eight
direct-access user hotkeys ( [F1] – [F8] ) for immediate access to your most frequently used
parameters for a particular program.
•
Ability to trigger / control functions in converter from remote midi control using the ‘function’
operand in the midi processor. For example, use a damper pedal as tap tempo source for
converter’s midi clock generator, or to turn on and off the midi clock generator itself. Over 45
functions are supported.
•
Ability to use any components from the mouse or joystick inputs to control functions in
converter using the ‘control function’ menu / parameters in these particular input subsystems,
in much the same way as midi input mentioned above. All functions available to the midi input
subsystem are also available to the mouse and gameport subsystems as well.
•
Ability to use audio to midi trigger mode using the original single-message type triggering
(‘normal’ mode) or the new ‘note on/off’ message mode, which generates discrete note off
messages in order to support midi equipment or software which does not implement the full
midi specification (treating note on velocity zero as a note off messages).
•
A few subtle optimizations here and there.
Bugs fixed in version 1.3:
Bugs fixed in version 1.3:Bugs fixed in version 1.3:
Bugs fixed in version 1.3:
•
Patch change decrement bug when view channel is set to [ALL] (oops)
•
Tap tempo to ms conversion chart overwriting menu page fixed (trivial)
•
Improper redraw when in note view panel during directload bug fixed (trivial)
new in version 1.2
The following features were introduced in version 1.2 of converter:
The following features were introduced in version 1.2 of converter:The following features were introduced in version 1.2 of converter:
The following features were introduced in version 1.2 of converter:
•
Dual interface card support implemented – this provides solid and reliable simultaneous audio
and midi input to converter, by using one soundcard for audio input, and another soundcard
with an MPU-401 Uart port for midi input. This enables simultaneous audio and midi input for
every soundcard standard supported by converter.
•
SoundBlaster Pro driver has been improved and perfected for faster computers.
•
Some software work-arounds to handle certain hardware problems found on specific
soundcards has been implemented.