Specifications

converter 1.5



2000 - 2005 urr Sound Technologies Inc.

audio filter settings

audio parameters : audio filter settings : lowpass / main+bandpass / highpass

[ F3 – F6 – F5/F6/F7 ]

filter type

Selects the type of filter to be used for the particular audio channel. Possible choices are shelving,

bandpass, and peaking EQ for lowpass and highpass channels. For the main/bandpass channels, a

choice of either bandpass or peaking EQ is available.

frequency

Selects the cutoff frequency in Hz for the filter for the particular audio input channel. Possible values are

between 20Hz and 5000Hz for lowpass channel filters, 20Hz and 10512Hz for bandpass channel filters,

and 1000Hz to 10512Hz for highpass channel filters.

Selects the Q (bandwidth or sharpness of the peak) of the filter. Possible values are between 1 and 15.

gain

When using a peaking EQ filter, this is the amount of gain applied to the center frequency, in dB. For

other filter types, it serves as an overall gain for the channel’s signal (post filtering).