Manual

12-Lead Parameters
9650-1201-01 Rev. M 29
12-Lead Parameters
12-Lead configuration parameters are only available if the 12-Lead ECG monitoring option is
installed in the unit, and include:
• Print 12 Lead 4 X 3
• 12 Lead Printout
• 12 Lead Freq Response
• Print 2 Copies 12 Lead
• Print 12 Lead Measurements
• Print 12 Lead Interpretation
• Auto Transmit After 12 Lead
• 12 Lead Fax Format
• Set Lead Groups
• Lead Group Default
• 12 Lead Secs Per Lead
• 12 Lead Print Speed
• PTCA Message Enabled
• PTCA Threshold
Print 12 Lead 4 X 3
This parameter value indicates the number of copies of a 12-lead 4x3 report (or limited 2 x 3
report) printed after pressing and holding the RECORDER button for three seconds. When set
to None, pressing and holding the RECORDER button causes a one- or three-lead DIAG
BANDWIDTH ECG strip to print.
Values are as follows:
12 Lead Printout
This parameter allows you to specify the format for 12-lead 4x3 printouts (or limited 2 x 3
reports). When set to Standard, the 12-lead 4x3 printout uses the standard lead format. When
set to Cabrera, the 12-lead 4x3 printout uses the Cabrera-style lead format.
Values are as follows:
12 Lead Freq Response
This parameter allows you to set the 12-lead filter settings and printing format.
Possible Values: 1 Copy, 2 Copies, None
Default: None
Possible Values: Standard, Cabrera
Default: Standard