Manualshelf

Owner manual

ManualsBrandsZOLL ManualsHealth and hygieneE Series Monitor Defibrillator Rev D
141142143144145146147148149150
E Series Service Manual
9650-1450-01 Rev. D 5-31
Communication Board
1. Remove the 4 screws securing the communication board to the
housing.
2. Remove the screw that is securing the PCMCIA board to
the housing. Lift PCMCIA assembly straight out.
Note: To remove the board tilt the side toward the PCMCIA assembly up,
and then lift out.
Note: During reassembly, ensure that the isolator is installed on top of
communication board.
& PCMCIA Module Removal